Editing Geo Alignment Rig (Home Made) (section)

== Adjusting Toe ==

1. Jack the car onto 4 even blocks of wood for working room (front of an S2 with low ride height)

2. Rear diffuser/under-tray off

3. Secure the steering wheel with a strap

4. Loosen front TRE locknuts and rear toe-link locknuts

5. Measure changes from the rear (thats whats moving), adjust and measure again repeatedly (see the service manual for HOW TO)

6. After getting the front toe perfect, when you tighten the locknuts you can alter the toe by a mm so be prepared to measure and redo a couple of times if you want perfection.