Editing CAN bus Mapping (section)

== Driving modes – Normal, Sport and Race ==

'''Status: Identified and working in firmware / iPhone application.'''

The three selected drive modes have been identified in project testing. The firmware distinguishes the states and passes the result to the iPhone display.

{| class="wikitable"
! Decoded state !! Displayed mode !! Project status
|-
| 0 || Normal || Identified
|-
| 1 || Sport || Identified
|-
| 2 || Race || Identified
|}

These values are '''decoded application states'''. They are not presented as raw values from a specific CAN byte until the underlying message, byte/bit and test captures are documented here.

'''Related known signal:''' <code>0x114</code>, B4 bit 7 (<code>0x80</code>) = drive-mode button input. This is separate from the selected-mode value.