Editing Bleed the cooling system (section)

== Pressure bleeding (S1/S2 K-Series): ==


Taken from [http://arc.seloc.org/viewthread.php?tid=268263&page=1 http://arc.seloc.org/viewthread.php?tid=268263&page=1], credit to Rotivator

''"Had to change my coolant today following a rad and fan change. Didn't have the proper service tool (as if I ever have) to pressure bleed the system so knocked this up out of an old bike inner tube.''

''Tied a knot in one end and stretched the other end over the open coolant bottle. Then attached a foot pump and pressurised the system. Did the bleeding as per manual - bled rear first then front, and worked a dream."''

[[File:DSC01176a.jpg]]

For a less pikey version Stefan3 posted a tip using a modified coolant cap [http://arc.seloc.org/viewthread.php?tid=337951&page=1 http://arc.seloc.org/viewthread.php?tid=337951&page=1].

[[File:p1050083small.jpg]]