Editing Wiper Variable intermittent (section)

== Fitment ==
[[Image:relay.jpg|thumb|left|New relay in place in the Elise, looking up from the footwell]]
The relay is situated up underneath the dashboard in the passenger footwell of the Elise.  It takes approximately 30 seconds to change it, no tools required, although some gymnastic ability is helpful!

To fit it, you need to get your head down into the footwell looking up at the back of the dash-front.  Up there (as shown above) are a couple of relays.   Pull out the one which looks the right shape, and check that the pin pattern is the same.  Push in the '99' relay and the job's done. If you're unsure which relay is for the indicators and which is for the wipers, turn on the hazard lights. You'll be able to hear the indicator relay working.

Now when you wash the screen, it'll wipe just twice, and you'll have variable intermittent.

To use the Variable intermittent, flick the wiper stalk to wipe the screen once.  Then wait for period of time "x" and put the stalk to intermittent setting.  The intermittent delay between wipes will now be "x".
Easy.