Editing Wheel Speed Sensor (section)

== Replacement Procedure ==

# Park the car on level ground and safely jack up the affected corner.
# Remove the wheel.
# '''Recommended:''' Disconnect the vehicle battery before unplugging the sensor.
# Locate the wheel speed sensor on the hub assembly. The sensor is retained by a single '''7mm bolt''' and has a cable leading into the hub.
# Remove the 7mm retaining bolt.
# Carefully withdraw the old sensor from the hub.
# Fit the new Bosch sensor into position.
# Reinstall the 8mm retaining bolt and tighten securely.
# Reconnect the electrical connector.
# Reconnect the battery.
# Refit the wheel and lower the vehicle.