Editing Interior - Evora (section)

===Removal===

The rear seat base can be easily removed and is just held in place with velcro. The seat backrest is also fairly simple to remove but requires a couple more steps.

On 2+2 cars, the rear seat backrest is secured by a screw behind each backrest top insert pad, two screws at the bottom edge and Velcro patches. To remove the seat:
* Remove the rear seat cushion by pulling free from its Velcro fastening.
* Remove both backrest top insert pads by pushing upwards to release the spring clips. Release each of the single screw fixings thus revealed.
* Remove the two screws at the bottom edge of the backrest, and pull the panel free from its Velcro fastening.

On 2+0 cars, the insulating pad on the rear bulkhead is retained by Velcro pads.