Geo Setups

Some standard Geo settings

Geometry	Standard S1 & S2	S2 135R	340R Road	340R Track
Ride Height F/R	130/130mm	120/120mm	100/1100mm	100/1100mm
Steering axis inclination	12°	12°	12°	12°
Front Castor	+3.8°	+3.7°	+3.8°	+3.8°
Front Camber	-0.1°	0°	-0.5°	-1.8°
Front alignment/toe	0.2mm OUT Overall	0 mm	0.2mm OUT overall	0.5mm OUT overall
Rear Camber	-1.8°	-1.8°	-2.0°	-2.7°
Rear alignment/toe	1.2mm IN Overall	1.2mm IN each side	1.5mm IN each side	2.5mm IN each side
Bump Steer		2.0° to 2.5° toe in

converting from mm to degrees; divide the toe in mm by the wheel rim diameter in mm then ARC SIN the answer

Setting your own geo

Whilst a race prep specialist can charge £200 for a Geo you can DIY Castor, camber and toe settings.

1. To baseline your current setup www.alignmycar.co.uk will find a local place with a Hunter alignment system who will privide a setup sheet showing Castor, camber and toe for £20

If you dont have the service manaual suspension sections refer to http://www.sandsmuseum.com/cars/elise/experience/maintenance/alignment/alignment.html

2. Set the front castor by "counting washers"

3. Set the front and rear camber by adding & removing shims

4. Back to the alignment centre to check your config for another £20 and set your front and rear toe for another £30