Headlamp aim

Headlamp aim is easiest reproduced, so if you are removing a headlamp work out where the beam is aimed on a wall first, then you can put it back there when you have finished.

The basic rule for aim adjustment is that the high beam should point directly ahead of the bulb/lenses/reflectors. Dipped beam is a little more complex, it is explained in the following.

http://www.dvtani.gov.uk/uploads/customerservices/Headlampleaflet.pdf

http://www.carinsurance.com/Articles/content169.aspx

This is an excellent article, however it describes US laws and regulations, these may or may not relate to UK policies. http://faqlight.carpassion.info/hl-aiming.htm