Category:DIY

After 12 years I decided to change them

[img=800x600]http://gallery.seloc.org/albums/userpics/21157/FILE0465.JPG[/img]

[img=800x600]http://gallery.seloc.org/albums/userpics/21157/FILE0465.JPG[/img]

Off with:

- window winder - door card

Now this may not be they way you would do it but I used a scraper to gently push the clips down one by one:

[img=800x600]http://gallery.seloc.org/albums/userpics/21157/FILE0467.JPG[/img]

A few fell down in the door but most stayed on the old rubber. It was not too long before it was off:

[img=800x600]http://gallery.seloc.org/albums/userpics/21157/FILE0468.JPG[/img]

- Took out the window, undoing the 3 10mm nuts that secure the window to the runner.

- Trimmed the new seal using tin snips

- put double sided tap on the seal

- placed the seal on the door as per the instructions

- re attached the clips

- put the window back in, door cards and winder.

[img=800x600]http://gallery.seloc.org/albums/userpics/21157/FILE0476.JPG[/img]

Same for the other side:

[img=800x600]http://gallery.seloc.org/albums/userpics/21157/FILE0477.JPG[/img]